I am currently using an old laptop (circa 2015) with a 250GB SSD in it, and 4GB of RAM. It runs Fedora 39 Server, and only hosts a Jellyfin instance through Docker right now (though I want to use Nextcloud later too). There is only 15GB of storage left on it, and the CPU is constantly overloaded (due to forced transcoding). I happen to have a lot of 500GB 3.5" HDDs laying around, and I want to use them in RAID 5. What hardware would be good for having 4 HDDs, and running Jellyfin and Nextcloud in Docker? I’m okay with either having just a 4-bay NAS (as long as it can handle transcoding (MKV 480p -> MP4)), or having a 4-bay NAS and a server/computer/NUC. I only have a budget of CAD$900 (USD$658 as of writing), but I am willing to go to CAD$1000 if absolutely necessary.

  • foggy@lemmy.worldEnglish
    0·
    6 months ago

    It totally doesn’t

    I’m running a 14th gen i9 with a 4080. It’s a power hungry boy. 1500w power supply. Generally using about 600-800w.

    Running this 24/7 costs me <$10/month in electricity.

    The old compaq presario with a Pentium II that probably pulled down 100w running Ubuntu server as described here made no statistically significant change in my electric bill. That is to say, it’s about as much change as being good or bad at turning off your lights when you’re not using them. It’s negligible.

    • ReasonablePea@sh.itjust.worksEnglish
      0·
      6 months ago

      At 600 watts running continuously wouldn’t that be 432 kWh a month?

      Assuming you didn’t mean you were running your gaming computer as the server.

      At 100 watts that comes out to 72 kWh, in CT where I live rates are waaaay higher then what I calculate your rate to be (around 2.5 cents per kWh)

      For me a 100 watt server is about ~$22 a month to run.

      Are you sure your paying 2.5 cents per kWh?

      • foggy@lemmy.worldEnglish
        01·
        6 months ago

        Idk what I’m paying per kwh, I am just going off my monthly bills.

        There are other power fluctuates, I’m sure. I pay it no mind I just look at the bill. 🤷‍♂️

        So far no bill has arrived that made me change behavior.

        Edit: I’ve also never measured what my machine actually pulls down continuously/when idle. I just know that it’s components demand that range, and that I need the headroom in my power supply for spikes.